An improved shear lag model for predicting stress distribution in hybrid fiber reinforced rubber composites

An improved micromechanical shear lag model, which considers the interphase and bonded fiber end, is developed to investigate the load-carrying characteristics and stress profiles in hybrid aramid/sepiolite fiber reinforced rubber composites. The properties of the equivalent matrix, which is combination of sepiolite fiber and rubber matrix, are determined by Mori-Tanaka method. The axial and shear stresses at the fiber end are resolved by the imaginary fiber technique. The results obtained from the improved model show the tensile stress has a maximal at the real fiber center and the interfacial shear stress has a maximal at the end of the real fiber. Comparing with the results from Tsai’s model, the improved model has a better agreement with the numerical simualtion results. The effects of the imaginary fiber length on the stress transfer are analyzed and the results show that the effects can be ignored when the imaginary fiber length is greater than twice of the fiber radius. The effects of interphase modulus and thickness on the maximal axial and shear stresses are discussed. The results show that the interphase modulus and thickness of about 106.3 MPa and 0.2 μm are optimal to prevent interfacial debonding and improve the strength of hybrid fiber reinforced rubber composites.     

Agronomic fortification of rice grains with secondary and micronutrients under differing crop management and soil moisture regimes in the north Indian Plains

Although the System of Rice Intensification (SRI) has been reported to produce higher paddy (Oryza sativa L.) yields with better-quality grains, little research has addressed the latter claim. This study investigated the interactive effects of rice cultivation methods with different irrigation schedules and plant density on the uptake and concentration of sulfur (S), zinc (Zn), iron (Fe), manganese (Mn) and copper (Cu) in the grain and straw of two rice cultivars during two rainy seasons in the northern plains of India. As the two seasons differed in amounts of rainfall, there were impacts of soil moisture differences on nutrient uptake. Plots with SRI cultivation methods enhanced the grain uptake and concentrations of S, Zn, Fe, Mn and Cu by 36, 32, 28, 32 and 63%, respectively, compared to conventional transplanting (CT). Under SRI management, the highest concentrations of S, Zn and Cu in the grain and straw occurred with irrigation intervals scheduled at 3 days after disappearance of ponded water (DADPW; 3_D), whereas Fe and Mn concentrations in the grain and straw were higher with irrigation at 1 DADPW (1 _D ) compared with plots under 3 _D or 5 DADPW (5 _D ). The higher nutrient uptakes were also manifested in higher grain yield in 1 _D and 3 _D plots (by 9 and 6%, respectively) compared with 5 _D . Wider spacing (25 × 25 cm) compared with closer spacing (20 × 20 cm) significantly increased yield and the uptake and concentrations of all the said nutrients in the grains. When comparing the performance of two cultivars, the total uptakes of Zn, Fe, Mn and Cu in both grain and straw were significantly more in Hybrid 6444 than the improved variety Pant Dhan 4. Overall, SRI crop management compared to CT practices led to more biological fortification of rice grains with respect to S and the four micronutrients studied, giving a concomitant yield advantage of about 17% on average in this region.     

Mapping QTLs using a novel source of salinity tolerance from Hasawi and their interaction with environments in rice

Background

Salinity is one of the most severe and widespread abiotic stresses that affect rice production. The identification of major-effect quantitative trait loci (QTLs) for traits related to salinity tolerance and understanding of QTL × environment interactions (QEIs) can help in more precise and faster development of salinity-tolerant rice varieties through marker-assisted breeding. Recombinant inbred lines (RILs) derived from IR29/Hasawi (a novel source of salinity) were screened for salinity tolerance in the IRRI phytotron in the Philippines (E1) and in two other diverse environments in Senegal (E2) and Tanzania (E3). QTLs were mapped for traits related to salinity tolerance at the seedling stage.

Results

The RILs were genotyped using 194 polymorphic SNPs (single nucleotide polymorphisms). After removing segregation distortion markers (SDM), a total of 145 and 135 SNPs were used to construct a genetic linkage map with a length of 1655 and 1662 cM, with an average marker density of 11.4 cM in E1 and 12.3 cM in E2 and E3, respectively. A total of 34 QTLs were identified on 10 chromosomes for five traits using ICIM-ADD and segregation distortion locus (SDL) mapping (IM-ADD) under salinity stress across environments. Eight major genomic regions on chromosome 1 between 170 and 175 cM (qSES1.3, qSES1.4, qSL1.2, qSL1.3, qRL1.1, qRL1.2, qFWsht1.2, qDWsht1.2), chromosome 4 at 32 cM (qSES4.1, qFWsht4.2, qDWsht4.2), chromosome 6 at 115 cM (qFWsht6.1, qDWsht6.1), chromosome 8 at 105 cM (qFWsht8.1, qDWsht8.1), and chromosome 12 at 78 cM (qFWsht12.1, qDWsht12.1) have co-localized QTLs for the multiple traits that might be governing seedling stage salinity tolerance through multiple traits in different phenotyping environments, thus suggesting these as hot spots for tolerance of salinity. Forty-nine and 30 significant pair-wise epistatic interactions were detected between QTL-linked and QTL-unlinked regions using single-environment and multi-environment analyses.

Conclusions

The identification of genomic regions for salinity tolerance in the RILs showed that Hasawi possesses alleles that are novel for salinity tolerance. The common regions for the multiple QTLs across environments as co-localized regions on chromosomes 1, 4, 6, 8, and 12 could be due to linkage or pleiotropic effect, which might be helpful for multiple QTL introgression for marker-assisted breeding programs to improve the salinity tolerance of adaptive and popular but otherwise salinity-sensitive rice varieties.

     

Mechanical behavior of nylon 66 tyre cord under monotonic and cyclic extension: Experiments and constitutive modeling

Many industrial products are made of cord-rubber composite materials. Their mechanical behavior not only depends on rubber but also depends on cord. Nylon 66 cord is one of the most important reinforcement in these products. This paper research the mechanical behavior of nylon 66 cord under various load cases. A series of experiments were carried out to obtaining stress-strain curves under different load cases. Complex changes of the modulus and Mullins effect can be found in monotonic and cyclic tension, respectively. Mechanism of these behaviors has been analyzed considering both the twisted structure and material. A phenomenological constitutive model, accounting for different loading conditions, has been firstly proposed base on strain energy density function and damage mechanics method. The proposed model has been verified by comparing the predicted results with experimental data. It has been found that the proposed model predicted the stress-strain curves that were consistent with the experimental data. The proposed model can be implemented in finite element software for engineering design and application.     

Habitat modification by invasive crayfish can facilitate its growth through enhanced food accessibility

Background

Invasive ecosystem engineers can facilitate their invasions by modifying the physical environment to improve their own performance, but this positive feedback process has rarely been tested empirically except in sessile organisms. The invasive crayfish Procambarus clarkii is an ecosystem engineer that destroys aquatic macrophytes, which provide a physical refuge for animal prey, and this destruction is likely to enhance vulnerability to predators. Using two series of mesocosm experiments, we tested the hypothesis that the invasive crayfish increases its feeding efficiency on animal prey by reducing submerged macrophytes, thus increasing its individual growth rate in a positive density-dependent manner.

Results

In the first experiment, increasing crayfish density reduced both macrophytes and animal prey (dragonfly and chironomid larvae) and, importantly, increased the growth rate of individual crayfish, in accordance with our expectation. In the second experiment, we used artificial macrophytes to clarify whether the physical architecture of macrophytes itself protects animal prey and limits crayfish growth rate. Increasing the artificial macrophyte quantity not only increased the survival of animal prey, but also retarded the crayfish growth rate.

Conclusions

We conclude that macrophytes strengthen bottom-up control of crayfish, but this effect can be relaxed by increasing the density of crayfish via reduction in macrophytes. This positive feedback process may explain the crayfish outbreaks and regime shifts occasionally observed in invaded freshwater ecosystems.

     

Combining multi-source data to explore a mechanism for the effects of micrometeorological elements on nutrient variations in paddy land water

Paddy land plays a key role in global crop production. Thus, paddy land water is a potential source of nitrogen and phosphorus; both nutrients largely contribute to non-point source pollution because they usually vary closely with micrometeorological elements (MEs) during the growth period. However, few studies have focused on the mechanism of co-variation between nutrients and MEs at the field scale. The relationships between nutrients in the paddy land water and MEs as well as soil water content, soil temperature, and the normalized difference vegetation index (NDVI) are still unclear. In this paper, an in situ experiment was designed to obtain 5 years of meteorological data and nutrient data (nitrogen and phosphorus); the size of the experiment plot is in accordance with the spatial resolution of NDVI data. Multi-source meteorological and satellite data were integrated to explore the mechanism of co-variation. The results show that precipitation, air temperature, and solar radiation are the three MEs significantly affecting the nitrogen concentration in the paddy land water during the growth period. The air temperature is the most important ME influencing the phosphorus concentration. At the same time, the NDVI, as an effective indicator of the photosynthetic potential of rice used to explore the relationship between nutrients, has a prominent influence on soluble nutrients, especially on dissolved phosphorus. These findings could significantly improve our understanding about the responses of paddy land nutrients during the growth period to the surrounding drivers, inclusive of MEs, soil water, soil temperature, and NDVI. Undoubtedly, it is a potentially helpful means to monitor the sources of non-point pollution.     

Synthesis of hydrophobic anthraquinoid magenta dyes having linear alkyl substituents

A new series of magenta dyes having different length of alkyl substituents was synthesized to dye unmodified polypropylene (PP) and ultra-high molecular weight polyethylene (UHMWPE) fiber. It could be concluded that the affinity of the dyes onto unmodified PP and UHMWPE fibers was increased with the increase of the length of alkyl substituents. The optimum length of alkyl group was determined as the longest dodecyl-substituted dye in this study. Their absorption spectra appeared almost the same at visible range, which meant that the length of alkyl substituents did not affect the color appearance of the dyes. The color fastness properties of the dyeings to washing, rubbing and light were good enough for commercialization.     

Multifunctional colored polyester fabric treated with dopamine hydrochloride at room temperature: higher tensile,hydrophilicity and anti-bacterial properties along with aminolysis

In this work, dopamine hydrochloride, an environmental friendly compound, was applied on polyester fabric through conventional simple impregnation method in alkaline solution (pH=8.5) at room temperature. In situ spontaneous oxidative polymerization of dopamine form polydopamine (PDA) along with aminolysis of polyester fabric surface. Also, a range of colored polyester fabric were successfully achieved by formation of polydopamine adhesive coating layer at different concentration of dopamine hydrochloride (0.001-4 g/l). Fourier transform infrared spectroscopy and field emission scanning electron microscopy showed deposition of polydopmaine on the polyester fabric surface. The modified colored polyester fabric showed reasonable durability against washing, rubbing and light. The treated polyester fabric with 2 g/l dopamine hydrochloride as optimum concentration indicated not only lower spreading time for water droplet and electrical resistance with higher tensile strength but also very good bactericidal activity against Staphylococcus aureus and Escherichia coli.     

Characterization,Pathogenicity and Chemical Control of <Emphasis Type="Italic">Streptomyces acidiscabies</Emphasis> Associated to Potato Common Scab

The pathogenicity of 10 bacterial isolates was investigated on potato, radish, carrot and beet, including sensitivity and pathogen control efficacy. The isolates were identified by morphological, biochemical and molecular methods. All isolates were pathogenic on radish, carrot, and beet, and were highly virulent on potato. Although the isolates were obtained from different locations in the El Fuerte Valley (Sinaloa, Mexico), they were similar in their morphological, physiological and biochemical characteristics. Sequences of the 16S rRNA gene obtained by PCR were identical for all isolates. These results indicate that the bacterial isolates from potato scabby tissue belong to S. acidiscabies. Furthermore, the effectiveness of fluazinam, both in vitro and under greenhouse and field conditions, represents a possibleoption for chemical control of potato common scab disease. While our results suggest that spraying at seeding is effective in controlling common scab, future studies to combine this treatment with seed dressing before planting will be conducted to determine if there is an increase in disease control.     

Breeding Differently: Participatory Selection and Scaling Up Innovations in Colombia

Global challenges like sustainable development, climate change, malnutrition and gender inequality can be tackled from an agricultural perspective. Micronutrient deficiency is a major problem for the health and food security of the population. In Colombia, iron deficiencies affect 32% of the children under the age of five; and 43% of the Colombian population have zinc and vitamin A deficiencies. We designed and implemented a research-for-development programme that links agriculture and nutrition through a two-stage project. In the first stage, we selected three new yellow potato cultivars with better nutritional contents, higher yield and better resistance to late blight than the traditional yellow cultivars. We characterized the Colombian germplasm, Solanum tuberosum Group Phureja, for its nutritional attributes. During this stage, studies of the social and nutritional status of the communities were also conducted. In the second stage, we focused on scaling up new potato cultivars to reach potato producers and consumers by promoting the production and marketing of good quality seed potatoes, by establishing four Rural Entrepreneurs Nuclei. The programme promotes gender equity, good dietary habits, the consumption of more nutritious potatoes and empowers local leadership to strengthen governance. Field work was conducted in southern and central regions of Colombia by employing social strategies such as the Family Farming Community Schools. In 50% of the cultivated area, we are replacing the originally used traditional yellow potatoes by the new, more nutritious, potatoes to reach 6 million consumers. A good quality seed system for small-scale potato growers has been implemented. These achievements have been reached through a comprehensive approach in a period of two years.